Asus Motherboard AP130-E1 - Manual (Page 80)

4-26 Chapter 4: BIOS Setup
4.4.7 PCI PnP Configuration
The items in this menu allow you to change the advanced settings for
PCI/PnP devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values may cause the system to malfunction.
Advanced PCI/PnP Settings
Plug & Play O/S [No]
OffBoard PCI/ISA IDE Card [Auto]
C.S.A. Gigabit Ethernet
Device
[Enabled]
Option ROM Scan [Enabled]
Bus Master [Enabled]
Promise RAID
Device
[Enabled]
Option ROM Scan [Enabled]
Bus Master [Enabled]
Latency Timer [Default]
NO: Lets the BIOS
configure all the devices
in the system.
YES: Lets the operating
system configure Plug and
Play (PnP) devices not
required for boot if your
system has a Plug and
Play operating system.
PCI Slot 1 Configuration
Option ROM Scan
[Enabled]
Bus Master [Enabled]
Latency Timer [Default]
PCI Slot 2 Configuration
Option ROM Scan
[Enabled]
Bus Master [Enabled]
Latency Timer [Default]
PCI Slot 1 Configuration
Option ROM Scan
[Enabled]
Bus Master [Enabled]
Latency Timer [Default]
PCI Slot 2 Configuration
Option ROM Scan
[Enabled]
Bus Master [Enabled]
Latency Timer [Default]
PCI Slot 2 Configuration
Option ROM Scan
[Enabled]
Bus Master [Enabled]
Latency Timer [Default]