Asus Motherboard AP130-E1 - Manual (Page 24)

2-4 Chapter 2: Hardware information
2.2.4 Layout Contents
Slots Page
1. DDR DIMM 2-11
2. PCI 2-16
Jumpers
1. Keyboard power (3-pin KBPWR) 2-17
2. RAID enable (3-pin RAID_EN) 2-17
3. Clear RTC RAM (3-pin CLRTC) 2-18
Rear panel connectors
1. PS/2 mouse port 2-19
2. Parallel port 2-19
3. PS/2 keyboard port 2-19
4. USB 2.0 ports 1 and 2 2-19
5. Serial port 2-19
6. Video port 2-19
7. RJ-45 port 2-19
Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY) 2-20
2. SMBus connector (6-1 pin EXTSMB1) 2-20
3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) 2-21
4. Serial ATA connectors (7-pin SATA-IDE3, SATA-IDE4) 2-22
5. Serial ATA RAID connectors
(7-pin R-SATA1, R-SATA2, R-SATA3, R-SATA4) 2-22
6. Chassis intrusion connector (4-1 pin CHASS1) 2-23
7. Power supply thermal connector (2-pin THERMAL_AUX) 2-23
8. CPU, System, and Auxiliary fan connectors
(3-pin CPU-FAN, SYSTEM-FAN, AUX-FAN) 2-24
9. Serial port 2 connector (10-2 pin COM2) 2-24
10. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V) 2-25
11. USB header (10-1 pin USB34) 2-26
12. System panel connector (20-pin PANEL) 2-26
- System power LED (3-1 pin PLED)
- Messagge LED (2-pin MLED)
- System warning speaker (4-pin SPEAKER)
- Hard disk activity LED (2-pin HD_LED)
- System management interrupt (2-pin SMI)
- ATX power switch/Soft-off switch (2-pin PWRSW)
- Reset switch (2-pin RESET)