Asus MOTHERBOARD K8N-E - Manual (Page 86)

4-22 Chapter 4: BIOS Setup
The following items appear only when RAID Option ROM item is set to
Enabled.
Primary Master as RAID [Disabled]
Enables or disables the use of the Primary IDE Master as RAID.
Configuration options: [Disabled] [Enabled]
Primary Slave as RAID [Disabled]
Enables or disables the use of the Primary IDE Slave as RAID.
Configuration options: [Disabled] [Enabled]
Secondary Master as RAID [Disabled]
Enables or disables the use of the Secondary IDE Master as RAID.
Configuration options: [Disabled] [Enabled]
Secondary Slave as RAID [Disabled]
Enables or disables the use of the Secondary IDE Slave as RAID.
Configuration options: [Disabled] [Enabled]
Third Master as RAID [Disabled]
Enables or disables the use of the Third IDE Master as RAID.
Configuration options: [Disabled] [Enabled]
Fourth Master as RAID [Disabled]
Enables or disables the use of the Fourth IDE Master as RAID.
Configuration options: [Disabled] [Enabled]
USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press to display the configuration options.
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows
None.
USB Configuration
Module Version - 2.23.2-7.4
USB Devices Enabled: None
USB Controller Support [USB 1.1+USB 2.0]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
Enables USB
host controllers.