Asus MOTHERBOARD K8N-E - Manual (Page 51)

ASUS K8N-E Deluxe motherboard 2-29
The System Panel connector is color-coded for easy and foolproof
connection. Take note of the specific connector colors as described.
K8V-E
®
K8N-E Chassis Alarm Lead
CHASSIS
+5VSB_MB Chassis Signal GND
(Default)
13. Chassis intrusion connector (4-1 pin CHASSIS)
This lead is for a chassis designed with intrusion detection feature.
This requires an external detection mechanism such as a chassis
intrusion sensor or microswitch. When you remove any chassis
component, the sensor triggers and sends a high-level signal to this
lead to record a chassis intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. To use the chassis intrusion detection feature,
remove the jumper cap from the pins.
14. System panel connector (20-pin PANEL)
This connector accommodates several system front panel functions.
K8V-E
®
K8N-E System Panel Connector
* Requires an ATX power supply.
PLED-
PWR
+5V Speaker
Speaker
Connector
Power LED
Ground
Reset SW
IDE_LED
IDE_LED+
Ground
Reset
Ground Ground
ATX Power
Switch*
PLED+
IDE_LED-