American Audio CDI-500 - Manual (Page 28)

PITCH ADJUSTMENTS
© American Audio ® - www.AmericanAudio.us - CDI-500 Mp3™ Instruction Manual Page 28
Figure 43
3. JOG WHEEL (13):
The JOG WHEEL will temporarily bend the pitch if a track is in playback mode
Rotating the wheel in a clockwise direction will increase your track pitch
and rotating the wheel in a counter-clockwise direction will decrease your
track pitch. The speed you rotate the JOG WHEEL will determine pitch bend
percentage (%). For example, if the JOG WHEEL is continuously turned in a
counter-clockwise direction the playback speed will steadily decrease and will
continue to decrease until playback reaches a maximum of -100% and play-
back stops entirely. When you stop turning the JOG WHEEL the disc speed
will automati
c
ally return to it’s previous set speed.
NOTE: To use the JOG WHEEL in a pitch bend function when the
SCRATCH EFFECT (19) is activated you must use the outer ring of the jog
wheel where the clear rubber insulator is attached.
FINE TUNE BPM
This feature lets you fine tune and lock the BPM's of the current playing track.
1. Press and hold the TAP BUTTON (6) and then turn the
PARAMETER TIME KNOB (29) to Fine Tune the BPM
of the current track. Once you have fine tuned the BPM,
it will be locked and can only be changed by pressing
and holding the TAP BUTTON for 2 secs.
NOTE: If you leave the adjusted BPM count as is, it will
carry over to the next song.
Figure 44