beautypg.com

Basic operations – American Audio CDI-500 User Manual

Page 16

background image

BASIC OPERATIONS

Figure 7: Press the Eject button to load and remove a disc. Remeber: When loading a disc always hold the disc by it
edges and load the disc label side up.

Figure 8: Tapping the reverse
track button or turning the
track knob counter clockwise
will jump back to the previous
track.

Figure 9: Tapping the forward
track button or turning the
track knob clockwise will skip
forward to the next track.

1. LOADING/EJECTING DISCS

The CDI-500 Mp3™ can only play regular 5 inch CDs. 3 inch, odd shaped, and oval CDs are not compatible.
When loading a CD into the player always hold the disc by it edge. Load the disc label side up and slide it in
the disc slot. Never touch the signal surface (the glossy side). To remove a disc from the slot press the EJECT
BUTTON (15)
.
CAUTION:

NEVER attempt to insert any other objects beside 5" CD in the disc slot.

• NEVER attempt to insert more than one disc at a time. Doing so may result in sever damage to your unit.

DO NOT force a disc into the slot when the power is off, this may damage the drive system.

2. SELECTING TRACKS

Select a desired track by using either of the two TRACK BUTTONS (27) or by turning the TRACK KNOB (25).

Tapping the TRACK BUTTONS (27) or turning the TRACK KNOB (25) once will select either the next higher or
lower track. You may hold down the TRACK BUTTONS (27) or turn and hold the TRACK KNOB (25) to change
tracks continuously at a faster speed. If you are using the TRACK BUTTONS (27) to select a new track during
playback (a track is already in play mode) the new track you selected will immediately begin playback as soon
as the search operation is completed.

©

American Audio

®

- www.AmericanAudio.us - CDI-500 Mp3™ Instruction Manual Page 16