Analog Way RK-300 - Manual (Page 3)

* a ccessible via the Shift Key
Press on [TAKE] allows to
display the pre-selected
sources onto the MAIN
output with the selected
effects.
VOL: Volume adjustment of the MAIN output (adjust with the knob ◄ ►).
Button is blinking during the adjustment. This function will be dis-
missed after 2 seconds delay or after pushing [ENTER] button.
MUTE: Toggles the audio mute of the Main output. Button illuminates
when volume is muted.
Easy adjustments (size or position) with this mini joystick. Adjust
the selected PIP or Logo, X-Axis (Left/Right), Y-Axis (Up/Down) and
click to change the mode (position or size).
ENTER button validates a selected item.
Adjust Sources:
Chose the selected source Aspect Out as:
1:1: No scaling, layer size has no effect
CENTERING*: Centered (aspect ratio preserved, black bars around source)
FULL*: Fullscreen (aspect ratio distorted)
CROP*: Cropped (aspect ratio preserved, extra image cropped
----
ZOOM: Configures the Layer Zoom
----
SIZE: Resize the active layer with the mini joystick
POS: Adjust PIP Layer or Logo Position with the mini joystick
CUT: Select Cut as the current transition type.
FADE: Select Fade as the current transition type.
USER 1: Selects the customized transition configured in the Control menu.
USER 2: Select User #2 as a customized transition in the Control
menu.
Preset section: Recalls stored presets from the device. Store presets
using Menu -> Preset-> Store Preset.
P1/P5: Select P #1 as a customized preset or P #5 by SHIFT function.
P2/P6: Select P #2 as a customized preset or P #6 by SHIFT function.
P3/P7: Select P #3 as a customized preset or P #7 by SHIFT function.
P4/P8: Select P #4 as a customized preset or P #8 by SHIFT function.
Allow to copy the previous
Current Preset in the Next
Preset at the end of a
[TAKE] .
Mini T-Bar to control
effect level.
Available when controling a device which offers Quadravision.
W1: Change the active layer into the Window #1.
W2: Change the active layer into the Window #2.
W3: Change the active layer into the Window #3.
W4: Change the active layer into the Window #4.
Allow to scroll through the
different menus
VOLUME
CONTROL
T-BAR
TOGGLE PRESET
TAKE
QUADRAVISION
ENTER
ADJUSTMENT
POSITION
EFFECT/PRESET