Alamo MACHETE FC-0002 - Manual (Page 165)

MAINTENANCE
MACHETE BOOM 3/09 Maintenance Section 4-19
©2009 Alamo Group Inc.
MAINTENANCE
MOTOR & COUPLING INSTALLATION
Bolt motor to mount plate. Fully tighten bolt (Item 1).
Install flex coupler to the quick disconnect pulley
hub using the countersunk socket head bolts (Item
2). Apply thread locking compound to the bolts.
Tighten bolts to 45 FT-LB. Attach motor mount
angle brackets, (Item 3) to the channel frame, leave
bolts loose.
Insert motor shaft into flex coupling and allow motor
to "find its center."
Adjust motor up as needed to provide ample
clearance between the top of flex coupling and the
motor. Bring angle brackets up to motor mount plate
and tighten the bolts.