AAON M3-094 - Manual (Page 43)

43
7. Pull sections together until exterior skins
meet.
Figure 15 - Pulling Sections Together
8. After ensuring that the dimensions are
correct, fasten sections together with self-
tapping screws (#10 HEX HEAD) on top
angle.
Figure 16 - Fastening Sections Together
9. Attach integrated splice on walls and roof
to adjoining section with self-tapping screws
(#10 HEX HEAD)
Figure 17 - Attaching Splice
10. Attach corner rail cover with provided
.5” #10 flat head screws.
Figure 18 - Attaching Corner Rail Cover