beautypg.com

Set attributes via rs-232 commands, Set up ip-232 rs-232 via control system – Contemporary Research IP-232 Ethernet to RS-232 Interface User Manual

Page 6

background image

Set Attributes via RS-232 Commands

Use a standard Null Modem DB9 F to DB9 F cable to connect a PC or USB COM port. Refer to RS-232

Commands in this manual for using Terminal to set up the IP-232 for your application.

Set RS-232 Attributes via Web Page

You can also set the RS-232 properties from an onboard Web page. Just set your browser to the unit’s IP

address and click to set.

Set Up IP-232 RS-232 via Control System

Once you’ve defined the IP address of the IP-232, you can also use your control system to configure the RS-

232 port. The typical approach is to send configuration commands via Telnet port 23 in the system start-up

sequence. With this approach, the programmer can define RS-232 port attributes in software, long before

the actual installation.