Contemporary Research ICC2-ATSC+ Manual - Manual (Page 12)

Contemporary Research 12 ICC2-ATSC
RS-232 Control Codes
The following chart includes the current control codes for TVs and projectors. We can add new command sets
as needed.
The ICC2-ATSC+ is shipped pre-loaded with the specific RS-232 code. Units can be updated to different control
code sets via the RF.
MFG Type Notes
Full Operation Responds to 0-NNN TV command for inputs
LG LCD
Mitsubishi VP
NEC 2 LCD Older M-series monitors
NEC 3 LCD New M, P, S, V, X series
Projection Design VP
Library Responds to Input command, will be
upgraded to full operation when needed
Eiki VP
Epson VP
Christie VP
InFocus VP
Hitachi VP
NEC 1 Plasma
Optoma VP
Panasonic LCD
Pioneer LCD
Samsung LCD
Sanyo VP
Sharp VP
Sony VP
Sony LCD
Specialty
Extron WP Emulates Wall Panel buttons
Input Selects
The code sets listed in Full Operation above the list have the ability to select inputs from a special channel
command, 0-NNN. For example, a 0-211 command would send the TV to the HDMI 1 input. For some makes,
such as LG, you need to send a TV/Tuner command (0-200) to restore the TV to the current channel. For other
sets, sending a channel command automatically selects the tuner if it’s at a different input. The command list
covers all the possibilities, not all sets have every option.
115=Captions
200=TV/Tuner
201=Video1
202=Video2
203=Video3
204=S-Video1
205=S-Video2
206=Component1
207=Component2
208=RGB1
209=RGB2
210=RGB3 211=HDMI1
212=HDMI2
213=HDMI3
214=HDMI4
215=HDMI5
Input Command
You will need to specify the default input for the ICC1-ATSC+, so that the unit will return to the correct input.
You can use the 45700 menu command on page 11 to set the input, or use IC-Send or Display Express to send
the ER command on page 23 to the tuner once it’s on the IC-Net RF network.