Contemporary Research QMOD-YPB2 - Manual (Page 9)

Contemporary Research
9 QMOD-SDI1.5
Installation - Sources
Process
 Connect source(s) to appropriate inputs
 Perform Quick Setup from front panel to test operation and channel
 Use USB Web pages or front panel menus to compete the setup
Component 1 and 2
 The YPbPr signal can be 1080i 29.97/30 Hz, 720p 59.94/60 Hz, or 480p/480i 29.97/30 Hz
 If the source has captioning data, that can be included by connecting the Composite out to the
Video/CC input
Video/CC 1 and 2
 The Video/CC input can be used to create an SD digital channel, or to feed Line 21 captioning data
Audio Inputs
 The Coax and analog Stereo inputs can be assigned to any input
 Dolby AC-3 will be passed through, stereo converted to AC-3 stereo
 When using 2 language tracks, the first will be AC-3, the second MPEG1 Layer 2 stereo
Ethernet
 The IP and Telnet ports are assigned via front panel or Web menus
 Streaming options can be set locally or remotely
EAS
 EAS (Emergency Alert System) operation is triggered by a latching input on the SW and Ground pins, a
5-12 VDC level on the V+ and Ground pins
 The assigned EAS inputs, usually Video and Stereo, will broadcast on both programs when active