CHIEF KSA1250 - Manual (Page 5)

Installation Instructions KSA1250
5
3. Slide base of monitor towards mount until lower tabs secure
display to mount. An audible “click” should be heard. (See
Figure 3)
Figure 3
Display Removal
WARNING: Only remove display from mount when the
display can be lifted up from the mount! DO NOT remove
display unless the display is in the upright position! (See
Figure 4)
1. Press quick release tab on back of display to release
display from faceplate. (See Figure 4)
2. Pull bottom of display away from faceplate. (See Figure 5)
3. Lift display up from faceplate. (See Figure 4) and (See
Figure 5)
Figure 4
Figure 5
3
(side view)
quick release tab
3
1
3
2