CHIEF KSA1250 - Manual (Page 4)

Installation Instructions KSA1250
4
TOOLS/PARTS FOR INSTALLATION
A (1)
[Interface
Bracket]
B (4)
M4 x 10mm
Assembly And Installation
1. Use four M4x10mm Phillips pan machine screws (B) to
secure KSA1250 interface bracket (A) to K1 Series
faceplate. (See Figure 1)
Figure 1
2. Install K1 Series mount to desk following K1 Series
Installation Instructions.
Display Installation
IMPORTANT ! : KSA1250 interface brackets are
designed specifically for Dell’s quick-connect style
monitors. Do not attempt to install any other type of
monitors to these mounts!
1. Position monitor over mounting tabs on quick-connect
bracket (A). (See Figure 2)
2. Lower monitor onto quick-connect bracket, inserting
mounting tabs into top two top mounting holes on back of
monitor. (See Figure 2)
Figure 2
(B) x 4
(A)
2
K1 Series mount faceplate
2
mounting
tabs