CHIEF PPD-2000 - Manual (Page 9)

Installation Instuctions PPD-Series
9
MOUNT PLASMA DISPLAYS ON CART (CONT’D)To install display:
WARNING! Make sure cart wheels are locked
before installing the display to the cart!
4. While supporting both sides of display, align four
mounting buttons on display or interface bracket
with four mounting holes in faceplate.
(See Figure 9)
5. Lower display into place listening for audible
"click" to ensure recessed area of mounting buttons
are properly seated in lower area of mounting holes
and ClickConnect mechanism has engaged.
(See Figure 9) and (See Figure 10)
Figure 9 : Hang Display
NOTE: Holes are provided in the faceplate for use with a
padlock or similar locking device, if desired. In addition,
the pin and nut may be removed from the upper holes
and moved to the lower holes for use as a more
permanent locking device. (See Figure 10 )
Figure 10: Secure Display
To use as a
A padlock or bolt may
be placed through latch
holes
more permanent lock,
remove pin and nuts and
move to lower holes.