CHIEF PPD-2000 - Manual (Page 8)

8
Installation Instuctions PPD-Series
MOUNT PLASMA DISPLAYS ON CART
1. Measure the distance from the center of your display
to its outermost edge.
NOTE: Make sure to leave some space between
displays when mounted.
2. Using the measurement found in Step 1 and the
faceplate (50) as a template, measure from the cen-
ter of the dual screen mounting bracket (80) to find
the correct mounting holes for your application (see
Figure 7).
3. Secure each face plate (50) using four 1/4-20x5/8”
screws (130) (see Figure 8).
Mounting Bracket (80)
Dual Screen
Figure 7. Dual Screen Mounting Bracket Head Measurements
Face Plates (50)
Figure 8. Dual Mounting Head with Face Plates Attached