Assemble cart (cont’d) – CHIEF PPD-2000 User Manual

Page 7

Text mode
Original mode

Installation Instuctions

PPD-Series

ASSEMBLE CART (CONT’D)

Adjust tilt head (70) to desired tilt by slightly loosen-
ing four 1/4-20x5/8” button head cap screws (130)
securing tilt head spreaders (90), adjust tilt head to
desired angle (0º to 7-1/2º), and tighten four
1/4-20x5/8” button head cap screws (130).
See Figure 5).

Using six 5/16-18X3/4” screws (140), secure the dual
screen mounting bracket (80) to the tilt mounting
head (70) (see Figure 6).

Dual

Loosen Screws

Tilt Head Spreader

0 to 7.5 Degrees

(80)

Mounting
Bracket

(90)

Tilt
Mounting
Head
(70)

Screen

5/16-18 Screws (140)

Tilt Mounting

Dual Screen
Mounting Bracket (80)

Head (70)

Figure 5. Adjust Tilt Mounting Head

Figure 6. Attach Dual Screen Mounting Bracket to Mounting Head