CHIEF FSRV_FSR4100 - Manual (Page 7)

Installation Instructions FSRV / FSR4100
7
2. Lift and maneuver display such that all mounting buttons fit
into openings on FSR assembly (A). (See Figure 7)
3. Lower display firmly into place. Ensure each mounting
button has fully seated in the opening. (See Figure 7)
4. Close latching flag by rotating flag counterclockwise on FSR
assembly (A). (See Figure 7)
Figure 7
NOTE: Mounting buttons are shown in the 100mm x 100mm
pattern. FSR assembly (A) will also accommodate a
75mm x 75mm pattern. (See Figure 8)
Figure 8
NOTE: An optional padlock may be used to secure latching flag
in place. (See Figure 9)
Figure 9
5. Connect cables to display as required.
Removing Display from Mount
1. Disconnect all cables from display.
2. Open latching flag by rotating flag clockwise on FSR
assembly.
3. Lift and maneuver display mounting buttons out of button
openings.
2
3
Display
(A)
4
Latching
flag
Button location for
100mm x 100mm
pattern (4 places)
Button location for
75mm x 75mm
pattern (4 places)
NOTE: Display not shown for clarity.
NOTE: Display not shown for clarity.