CEMB USA K8 (C) - Manual (Page 3)

I 0668 - 3 GB
1.1 -
►
GENERAL SAFETY REGULATIONS
The machine should only be used by authorized and suitably trained personnel.
Do not use the machine for purposes other than those specifi ed in this manual.
The machine should not be modifi ed in any way except for those modifi cations explicitly
carried out by
specialised personnel.
Never remove the safety dehyvices. Any work on the machine should only be carried out
by specialised personnel.
Avoid using strong jets of compressed air for cleaning.
Use alcohol to clean the plastic panel or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
Before starting the wheel balancing cycle, make sure that the wheel is securely locked on
the adapter.
The machine operator should avoid wearing clothes with fl apping edges. Make sure that
unauthorized personnel do not approach the machine during the work cycle.
Avoid placing objects inside the cabinet as they could impair the correct operation of the
machine.
1.2 -
►
FIELD OF APPLICATION
The machine is designed for balancing wheels of car, light commercial vehicles or motorcycle, weighing less
than 75 Kg. It can be operated in the temperature range of 0° to + 45° C.
1.3 -
►
OVERALL DIMENSIONS
1.4 -
►
TECHNICAL DATA
Single-phase power supply 115 / 230 V 50/60 Hz
Protection class IP 54
Max.power consumption 0,8 Kw
Cycle time for wheel 4.7 s. (5 3/4"x14") 15 Kg.
Balancing speed <100 min -1
Balancing accuracy 1 gram
Position resolution ± 1.4 °
Average noise < 70dB (A)
Rim width setting range 1.5” ÷ 20” or 40 ÷ 510 mm
Diameter setting range 10” ÷ 30” or 265 ÷ 765 mm
GENERAL