CEMB USA C75_2-L (B) - Manual (Page 31)

I 0522 - 31 GB
NOTE: The innovative IC software has been designed to reduce the amount of weight used to correct the
unbalance, leaving a residual unbalance on the wheel within the set tolerances.
The tolerance used by the machine is obtained from a tolerance of a reference wheel, modifi ed in order to
make the vibration generated by the reference wheel comparable with that in use.
This is obtained according to the coded theory of the ISO standards.
In general, a wheel balanced using IC has a higher residual unbalance than a wheel balanced at best using
the conventional method, but, although generating a tolerable vibration from the vehicle, it has the
advantage of considerably reducing the counterweights used.
6.14 -
b
for I.C.
In the case of the I.C. correction method, when this function is set to ON it allows:
displaying the unbalance correction values with an approximation of 1g/0.1 ounce.