9type-c assembly instructions (continued) – Hunter 99023 Bowl Light Fitter User Manual

Page 9

MA003-01 • 07/24/13

1.888.830.1326

TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)

Installing the bulb - Install a bulb
into each socket. When necessary,

replace bulbs with bulbs of same

type and wattage.

Socket

If necessary, attach the extension chain

provided to the fan pull chain coming

from the switch housing. Then feed the
end of the extension chain through the

grommeted hole in the light kit.

Grommeted

Hole

Light Pull

Chain

Fan Pull

Chain

Installing the pull chain pendant -

Attach the pull chain pendants to the

end of the short chains coming from the

switch housing and the light kit. Turn

power on. Your installation is complete.

Installing the globe - Press the globe and

globe keeper flush against the metal plate.

Thread the light pull chain through the hole

in the center of the finial cap and thread

the fan pull chain through the hole in the

side of the cap. Finally, thread only the light

pull chain through the hole in the finial and

screw the finial onto the threaded rod.

Globe

Keeper

Finial Cap

Finial