Which assembly method will i use – Hunter 99023 Bowl Light Fitter User Manual

Page 3

MA003-01 • 07/24/13

1.888.830.1326

If your fan’s switch housing cap resembles

this one, remove the whole switch

housing by removing the switch housing

screws with a Phillips head screwdriver.

Remove the two cap screws from the

inside of the switch housing. Reinstall

the switch housing. Tighten the switch

housing screws. Then follow the TYPE-A

ASSEMBLY INSTRUCTIONS on pages 4-5.

If your fan’s switch housing cap

resembles this one, remove the cap

screws with a Phillips head screwdriver.

Then follow the TYPE-A ASSEMBLY

INSTRUCTIONS on pages 4-5.

Switch

Housing

Cap

Screw

WHICH ASSEMBLY METHOD WILL I USE?

Switch

Housing

Cap

Switch

Housing

Screw

If your fan’s switch housing cap resembles

this one, remove the whole switch

housing by removing the switch housing

screws with a Phillips head screwdriver.

Remove the plug button using a standard

screwdriver. Then follow the TYPE-C

ASSEMBLY INSTRUCTIONS on pages 8-9.

Switch

Housing

Screw

Plug

Button

If your fan’s switch housing cap

resembles this one, remove the whole

switch housing by removing the switch

housing screws with a Phillips head

screwdriver. Remove the plug button.

Then follow the TYPE-B ASSEMBLY

INSTRUCTIONS on pages 6-7.

Switch

Housing

Screw

Plug

Button

Choose one of the four images below that most closely resembles the switch

housing on your fan; then follow the instructions under the image.