Type-a assembly instructions (continued) – Hunter 99023 Bowl Light Fitter User Manual

Page 5

MA003-01 • 07/24/13

1.888.830.1326

Installing the Pull chain pendant -

Attach the pull chain pendants to the

end of the short chains coming from the
switch housing and the light kit. Turn on

power. Your installation is complete!

Installing the bulb - Install a bulb into each

socket. When necessary, replace bulbs with

bulbs of same type and wattage.

Socket

Installing the globe - Press the globe

and globe keeper flush against the metal

plate. Thread the light pull chain through

the hole in the center of the finial cap

and thread the fan pull chain through

the hole in the side of the cap. Finally,

thread only the light pull chain through

the hole in the finial and screw the finial

onto the threaded rod.

TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)

Globe

Keeper

Finial Cap

Finial