Cautions, Warnings, Troubleshooting – Hunter 28573 Frosted Dual Use Bowl Light Kit User Manual
Page 2
CAUTIONS
• Read entire installation instructions carefully before beginning instal-
lation and save these instructions.
• To reduce the risk of electrical shock, install this light fixture only on
Hunter
TM
fan type 5. Marked suitable for use in wet locations when
installed in a GFCI protected branch circuit. Note: e fan type can
be found on the ceiling fan package or on the name plate label located
on top of the motor housing of the ceiling fan.
WARNINGS
• To avoid possible electrical shock, before installing light fixtures dis-
connect power by turning off the circuit breakers both to the outlet
box and to its associated wall switch location. If you cannot lock the
circuit breakers in the off position, securely fasten a prominent warn-
ing device, such as a tag, to the service panel.
• Connect house wiring to the fan before attaching the light fixture to
the fan.
• All wiring must be in accordance with national and local electrical
codes. If you are unfamiliar with wiring, you should use a qualified
electrician. Professional installation is recommended.
Troubleshooting
Light does not come on.
1. Pull light pull chain one or two times to see if light comes on.
2. Make sure bulbs are installed properly and filament is not blown.
3. Make sure breakers or fuses are on.
4. Verify that the light power lead is connected at the ceiling. Refer to your
ceiling fan manual for locating assembly and wiring.
Glass rattles.
1. Make sure the glass globe is secure.
For other problems or ques-
tions, contact the Hunter Fan
Company Technical Support
at
1-888-830-1326 or
http://www.hunterfan.com
is light fixture is for use
only on Hunter Outdoor
Elements
TM
Ceiling Fans,
models 28532, 28533, 28534,
28535, and 28536.
41770-01.indd
5/17/2005, 5:26 PM
2