Hunter 28568 Swirled Marble Dual Use Bowl Light Kit - Manual (Page 7)

7
43550-01 • 06/10/10 • Hunter Fan Company
2 • Installing the Light Kit on a Removable Switch Housing (Continued)
7 . Remove the wire connectors from the two wires in the switch housing
labeled “Connect Light Here” or “For Light Use .”
To connect the wires, hold the bare metal leads together and place a
wire connector over them, then twist the wire connector clockwise
until tight .
Connect the black wire with a white stripe from the switch housing
to the black wire from the light kit . Connect the white wire from the
switch housing to the white wire from the light kit . Secure all wire
connections using wire connectors .
CAUTION: Be sure no bare metal wires or wire strands are visible after
making the connections .
8 . Reconnect the 9-pin plug connector .
9 . Reinstall screws to reattach the lower switch housing to the upper
switch housing .
10 . Go to the instructions for Installing the Bulbs, Chains, and Globe .
Wires
and Wire
connectors
Step 7
Plug
Connector
Lower Switch
Housing
Housing
Assembly Screw
Plug
Connector
Detail
Step 8