Hunter 99164, 99165, 99166 Traditional Globe Light Kit - Manual (Page 3)

MA022-01 • 03/07/14
1.888.830.1326
3
If your fan’s switch housing cap
resembles this one, remove the cap
screws with a Phillips head screwdriver.
Then follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
Switch
Housing
Cap
Cap
Screw
If you are installing this light kit onto
a Hunter Original, remove the cap
screws with a Phillips head screwdriver.
Keep the screws Remove the cap.
Then follow the TYPE-A ASSEMBLY
INSTRUCTIONS on pages 4-5.
WHICH ASSEMBLY METHOD WILL I USE?
Switch
Housing
Cap
Switch
Housing
Screw
Choose one of the four images below that most closely resembles the switch
housing on your fan; then follow the instructions under the image.
If your fan’s switch housing cap
resembles this one, remove
the whole switch housing by
removing the switch housing
screws with a Phillips head
screwdriver. Remove the two
cap screws from the inside of
the switch housing. Reinstall
the switch housing. Tighten the
switch housing screws. Then
follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
If your fan’s switch housing
cap resembles this one,
remove the whole switch
housing by removing the
switch housing screws with
a Phillips head screwdriver.
Remove the plug button using
a standard screwdriver. Then
follow the TYPE-D ASSEMBLY
INSTRUCTIONS on pages 10-11.
Switch
Housing
Screw
Plug
Button
If your fan’s switch housing cap
resembles this one, remove
the whole switch housing by
removing the switch housing
screws with a Phillips head
screwdriver. Remove the plug
button. Then follow the TYPE-C
ASSEMBLY INSTRUCTIONS on
pages 8-9.
Switch
Housing
Screw
Plug
Button
Cap
Screw
Switch
Housing
Cap