Hunter 28704 52 Skyline User Manual
Page 13
13
42449-01 • 11/09/10 • Hunter Fan Company
Lower Switch
Housing
Housing
Assembly Screw
Plug
Connector
Detail
7-6 . To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly .
Note: Both plug connectors are polarized and will only fit together
one way . Make sure the connectors are properly aligned before
connecting them . Incorrect connection could cause improper
operation and damage to the product .
7-7 . Place the lower switch housing assembly over the upper switch
housing . Align the side screw holes in the upper and lower switch
housings . Attach the lower switch housing to the upper switch
housing with three housing assembly screws .
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Steps 7-6 – 7-7
Plug
Connector
Note: In compliance with US federal energy regulations, this
ceiling fan contains a device that restricts its light output .
Exceeding the wattage limit marked on the MAX wattage
sticker affixed to the light socket(s) may result in fire
hazard or improper operation . If lights do not appear to be
operating properly, see the troubleshooting section .