Hunter 59009 52 Allegheny Low Profile - Manual (Page 15)

15
42221-01 • 06/04/12 • Hunter Fan Company
Problem: Nothing happens; fan does not move
1. Turn power on, replace fuse, or reset breaker.
2. Pull the pull chain to ensure it is on.
3. Loosen canopy, check all connections according to the wiring the fan section.
4. Check the plug connection in the switch housing.
Problem: Noisy operation
1. Tighten the blade assembly screws and blade iron armature screws until snug.
2. Check to see if the blade is cracked. If so, replace all the blades.
Problem: Excessive wobbling
1. Make sure the blades are securely attached to the blade irons according to the blade assembly
instructions provided.
2. After thoroughly verifying the blades are securely attached to the blade irons, follow the instructions in
the enclosed balancing kit to balance the fan.
If you need parts or service assistance, please call
888-830-1326 (In Canada, call 866-268-1936) or
visit us at our website at
http://www.HunterFan.com.
Hunter Fan Company
7130 Goodlett Farms Parkway #400
Memphis, Tennessee 38016
9 • Troubleshooting