J&M Uni-Swivel Hydraulic Auger User Manual

Page 7

750-16 OWNER’S MANUAL

SAFETY SIGNS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged or Missing!

IMPORTANT: Install new safety signs if the old signs are
destroyed, lost, painted over or cannot be read. When
parts are replaced that have safety signs, make sure you
install a new sign with each new part. New signs are
available from the manufacturer or your authorized dealer.

Ref. # Description

Part # Req’d

Sign, Danger

DD-103 1

Sign, Danger

DD-104 1

Sign, Warning

DW-106 1

Sign, J&M

DI-114 2

Sign, Warning

DW-105 1

Sign, Caution

DC-110 1

DD-103

DD-104

DD-105

Set-Up of Uni-Swivel Hydraulic Augers
Comes complete with the following:

1 - Auger Tube, Swivel Assembly, with control rod, top spout
1 - Parts Carton - consists of:

1 - 6” diameter rubber spout x 4’ long
1 - 6” hose clamp
2 - 1/2” hydraulic hose x 84”
1 - winch assembly
1 - 1/2” curved rod x 40”
1 - transport bracket w/ ratchet and tie-down strap
1 - coupler bracket
2 - Flat Attaching Brackets
1 - 3 piece adjustable hopper
1 - hose holder bracket
1 - owners manual (set-up) w/winch parts list
1 - Parts Bag - consists of:

1 - 3/8” J-Bolt

2 - 3/8” x 1 1/2” Hex Bolts - Gr 2

2 - 3/8” Lockwashers

1 - 6” rubber strap with hooks

35 - 3/8” Hex Lock Nuts

2 - 3/4” Flatwashers

1 - 9” rubber strap with hooks

20 - 3/8” Hex Nuts

2 - 3/16” Hair Pin Clips

1 - 3/16” pulley (zinc)

6 - 3/8” x 3/4” Hex Bolts - Gr 2

2 - 3/8” x 1” Tab Bolt

2 - 5/16” pulley (zinc) small

27 - 3/8” Flat Washers

2 - 5/16” Shackles

1 - 1/2” pulley (black)

18 - 3/8” x 1/2” Stove Bolts

2 - 3/8” Wing Nuts

1 - 3/16” cable x 11’ (winch)

1 - 1/4” Rope Clamp

27 - 3/8” x 1” Hex Bolts - Gr5

1 - 3/16” cable x 7’ (safety)

1 - Plastic Rope Handle

1 - 5/16” Rope x 15’

3 - 3/16” cable clamps

1 - 3/8” x 3/4” Hex Bolt - Gr 8

1 - 3/8” Lock Nut - Gr 8

Tools Required - Hammer, Screwdriver, Drill with 13/32” Bit, 2 Vise-Grips, 2 - 9/16” wrenches, 1 - 7/16”
Wrench (Two persons are needed for set-up)

1/2” Pulley

(black)

5/16” Pulley

(zinc)

3/16” Pulley

(zinc)

DC-110

DW-106