J&M Uni-Swivel Hydraulic Auger - Manual (Page 6)

6
SAFETY
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Safety is a primary concern in the design and manufacture of our products. Unfortunately, our
efforts to provide safe equipment can be erased by an operator’s single careless act. In addition,
hazard control and accident prevention are dependent upon the awareness, concern, judgement,
and proper training of personnel involved in the operation, transport, maintenance and storage of
equipment.
Make certain that the operator(s), prior to operating is instructed in safe and proper use and reviews
and understands the manual(s) pertaining to this machine.
Read this manual before you operate this machine. If you do not understand any part of this
manual, or need more information, contact the manufacturer or your authorized dealer.
Understand that your safety and the safety of other persons is measured by how you service, and
operate this machine. Know the positions and functions of all controls BEFORE operating this
machine. Make sure to check all controls in a safe area before starting your work.
The safety information given in this manual does not replace safety codes, federal, state or local
laws. Make certain your machine has the proper equipment needed as designated by local laws
and regulations.
Hydraulic oil leaking under pressure can penetrate skin and cause infection or other injury.
To Prevent Personal Injury:
Relieve all pressure, before disconnecting fluid lines.
Before applying pressure, make sure all connections are tight and components are in good
condition.
Never use your hand to check for suspected leaks under pressure. Use a piece of cardboard
or wood for this purpose.
If injured by leaking fluid, see your doctor immediately.
When transporting your hydraulic auger, always keep the auger in the stow position and make sure
that it is properly fastened in the transport bracket. Use care when moving or operating the hydraulic
auger near electric lines as serious injury or death can result from contact.
Never adjust, service, clean or lubricate the hydraulic auger until all power is shut off.
Keep all safety shields in place. Keep hands, feet, and clothing away from moving parts while the
unit is in operation.
Make sure that everyone is clear of the equipment before applying power or moving the machine.
Never position yourself or others underneath the auger. Be sure that the safety cable is secured
properly along with the winch cable.
Make sure that the gravity box is properly fastened to the running gear. Be sure that the gravity box
and attached running gear is large enough to support the weight of the auger when the auger is
extended so as to prevent tipping over of the unit. Do not operate the unit on a slope or side of a hill
as tipping of the unit could occur.