J&M Storm Tracker 2 Track system (2011 & newer) - Manual (Page 6)

6
Service
Lubrication Service Schedule
IMPORTANT: Your Track System has grease fittings at all critical points. These should be serviced before
the track is put into operation. BE SURE THAT ALL POWER IS SHUT OFF BEFORE SERVICING THE
TRACK SYSTEM.
The grease points shown should be lubricated daily before use. Multipurpose Lithium Grease is recommended
for idler and mid-roller bearing lubrication.
OPERATING INSTRUCTIONS
IMPORTANT: To maximize the life of your track system, it is recommended that wide turns be consistently
made whenever possible. Turning in a circle that is THREE TIMES the overall length of the tractor and track
unit will reduce premature wear on the belt and undercarriage.