Leaner setup manual – J&M GRAIN CARTS Leaner Setup User Manual
Page 2
LEANER SETUP MANUAL
STEP - 1.0
NOTE
FOR CARTS WITH THE TARP OPTION:
The boxed in area shown above is to show which bolt holes should have rounded head bolts
placed in them during assembly. Use rounded head bolts at any location where it is possible that
the tarp may hit the bolt head to avoid damage to the tarp during use.
-1-
Detail #
Description
Quantity
1
3/8”-16 x 1” serrated flange hex bolt
118
2
3/8”-16 x 1” serrated flange hex nut
108
3
3/8”-16 x 1” centerlock hex nut
10
NOTE: This is a general list of parts for a leaner. Some of these will be already installed on arrival
or installed in sideboard set up. The purpose of this list here is to provide a visual aid along with the
previous page.
See also other documents in the category J&M Gardening equipment:
- 525-14W (31 pages)
- 750-16 (33 pages)
- 750-18 (34 pages)
- 1000-20 (31 pages)
- 1050-20 (37 pages)
- 1130-20 (36 pages)
- 1325-20 (36 pages)
- GC-24T Manual (39 pages)
- GC-31T Manual (38 pages)
- 250-7S (12 pages)
- 385SD (13 pages)
- 440SD (13 pages)
- 680SD (13 pages)
- 750SD (13 pages)
- GW15t-1 (20 pages)
- 275ST (62 pages)
- 375ST (62 pages)
- 500ST (51 pages)
- 375ST Remote (24 pages)
- 500ST Remote (23 pages)
- PRO 450 (31 pages)
- TF2 (37 pages)
- HT-974 (16 pages)
- TB-3500-6000A (20 pages)
- TB-3500-6000H (21 pages)
- TB-8000H-42 (20 pages)
- 4WS15 (27 pages)
- 750-14 (29 pages)
- 818 (35 pages)
- 875-16 (29 pages)
- 1000-20S (34 pages)
- 1050-18S (28 pages)
- 1050-18D (22 pages)
- 1050-20S (33 pages)
- 1050-20D (33 pages)
- 1050-22S (23 pages)
- 1050-22D (14 pages)
- 1051-22S (33 pages)
- 1051-22D (33 pages)
- 1075-18R (23 pages)
- 1075-22R (23 pages)
- 1325-20S (33 pages)
- 1325-20D (33 pages)
- 1325-22S (23 pages)