J&M GRAIN CARTS Leaner Setup - Manual (Page 11)

Use the Hanger Bracket to mark and drill four 3/8” holes on the rear of the cart as shown above.
The 29 3/4” dimension is from the top of the shell, not the top of the sideboard. Attach the hanger
bracket to the back wall with four 3/8”-16 x 1” serrated flange hex bolts and four 3/8”-16 serrated
flange hex nuts.
-10-
Use one 1/2”-13 x 1 1/4” hex bolt and one 1/2”-13 centerlock hex nut to bolt the tarp crank handle
hanger hook to the hanger bracket. Do not completely tighten the bolt for the hanger hook. This
hook needs to swing freely.
STEP - T2.0
STEP - T1.0
LEANER MODEL GRAIN CART TARP INSTALLATION