5 ide configuration, Onboard pci ide controller [primary, Serial-ata 1/2 controller [enabled – Asus T3-M2NC51PV User Manual
Page 67: Nvidia raid setup

5-13
ASUS T3-M2NC51PV
5.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press
if you want to configure the item.
IDE Configuration
Onboard PCI IDE Controller
[Primary]
Serial-ATA 1 Controller
[Enabled]
Serial-ATA 2 Controller
[Enabled]
nVidia RAID Setup
Onboard PCI IDE Controller [Primary]
Allows you to select the PCI IDE controller mode. Set this item to disabled
to disable the integrated IDE controller. Set it to Primary to enable the
Primary IDE controller. Configuration options: [Primary] [Disabled]
Serial-ATA 1/2 Controller [Enabled]
Allows you to enable or disable the Serial-ATA 1 and 2 controller.
Serial-ATA 1 controller controls SATA1 and SATA2. Serial-ATA 2 controller
controls SATA3. Configuration options: [Enabled] [Disabled]
When in AHCI/RAID
mode, SATA controller
is forced to Native
mode.
RAID Setup
nVidia RAID Function
[Disabled]
nVidia RAID Setup
nVidia RAID Function [Disabled]
Allows you to disable or enable the nVidia RAID function.
Configuration options: [Enabled] [Disabled]