Avalon Stoves 21 TRV - Manual (Page 4)

Avalon Hideaway Bungalow Face
(95700121)
Page 4 of 4 Printed April 16, 2008
Preparing the Fireplace for Thick Facing
The 21 TRV has a sliding heat shield that must be properly positioned when using thick facing. See the directions
below for adjusting the heat shield.
Loosen these two nuts above
the firebox (3/8” wrench).
Slide the heat shield forward until it is flush with
the facing and tighten the nuts to secure.
Face Installation and Removal
Once the face is in place,
open the access door and
tighten this screw (5/16”
wrench). This locks the
face in place.
The upper slots have a spring-
tensioned lever that catches the
small teeth on the brackets.
Face Attachment Face Removal
Loosen the
lower screws.
Pull the bottom of the face
out then disengage the face
from the frieplace.