Castle Equalizer Edgebander - Manual (Page 21)

Description of Parts
Glue Pot:
Found in the middle of the yellow Mechanical Channel. The
main part is the Glue Transfer Wheel located in the top of the
Glue Pot. It applies glue as the board is pushed through the
machine.
Guillotine:
Cuts the banding after a board is passed through and glued.
Pushing the white Delrin plate above the Guillotine will also
activate it.
Glue Magazine:
Where the glue pellets are loaded and stored for transfer into the
Glue Pot. To change pellet colors, pull on the Glue Magazine
Gate located near the top of the yellow Mechanical Channel.
The pellets will drop out of the bottom of the machine (near the
indicator) on the bottom edge of the machine.
**NOTE: Do not fill past halfway.
Band Reel:
Used to hold and help feed the roll of banding that will be
applied to the work.
Hopper Extension:
A special brown paper is formed to fit the bottom of the
aluminum chute to better guide glue pellets to the Glue Pot.
Three extra Hopper Extensions are located on the Band Reel
when the machine is shipped.
19