Castle Equalizer Edgebander - Manual (Page 20)

ƒ Adjust for the width of the tape with the screw on the front of the Mechanical
Channel. It has a spring under its head.
ƒ This should also be adjusted until the tape has a slight drag. The spring keeps the
adjustment from changing with use.
Leveling the Outrigger Wheels
Each Outrigger Wheel can be independently leveled.
ƒ Loosen the two bolts that hold the Wheel Cage to the Arm
ƒ Loosen these to the point that the Wheel Cage moves in its mountings, but has enough
resistance to stay in place when repositioned.
ƒ Repeat these steps with each of the Wheels on that particular Arm until they are all
slightly loose.
ƒ Place a level (or any true flat surface that is long enough), across the Rollers in the
main body and outward over the Outrigger Wheels.
ƒ In this way each Wheel can be positioned to “just touch” the leveling surface.
18