Castle LB-23 Operator Manual - Manual (Page 6)

4
ƒ The fitting towards the front comes with a plug in it; if you want to attach
an air tool to the machine you can use this port.
ƒ For optimal performance of your LB-23 plug your motor directly into the
wall. The use of an extension cord and/or having the machine at the end
of a circuit may impede the performance of the machine.
ƒ With the air hooked up to your machine and the power turned off,
position the foot pedal in such a way it is comfortable for the operator.
Take a few minutes to get familiar with how it operates.
ƒ Pressing halfway down on the pedal will bring the index pins down and
full depression will bring the head down.
ƒ Next, cycle the machine with the motor on and the stock in place.