Castle LB-23 Operator Manual User Manual
Page 18
Indexing Pins
The indexing pins are used after the first set of holes has been
cut and the next set need to be aligned with the previous cut.
Plunger Locks
The Plunger Locks are located on either side of the yellow
guard. They lock the yellow guard into place.
Side Stops
These are located on the right and left side of the machine.
They slide right or left to set the beginning hole position. The
extensions are shipped inside the machine and are put into place
during set-up.
Bits
The patented tooling for the LB-23 is designed to give
maximum performance for an extended period of time.
Typically, all of the bits will need to be replaced at the same
time but occasionally individual bits will become damaged and
need replacement
16