Kaiser A501N - Manual (Page 22)

EN
22
LIGHTING
The lighting system consists of halogen lamps of 20 W
or incandescent lamp of 40W power each.
incandescent lamp
U ring holding the halogen lamp
glass sing a flat
tool or screwdriver and holding it,
remove to the outside,
Replace the lamp 2 using a piece of cloth or paper
for that purpose,
Then reinstall the ring and the glass proceeding in
reverse order.
CLEANING
The following shall be avoided during normal
cleaning of the hood:
• Hard, rough cloth or sponge and water jet.
• Solvents or alcohols which might dull lacquered
surfaces.
• Caustic agents, particularly in regard to cleaning
stainless steel elements.
It is recommended to us moist cloth and neutral
cleaning agents.
Replacement of an
• Remove the grease filters and remove the lamp.
replace it with a lamp of the same type.
Replacement of a halogen lamp
• nscrew the 1
or, if the ring has no threading, u
extract it ,
•
•
Attention! Make sure that you do not touch the
halogen bulb to be installed with your bare fingers!
2
1