Actiontec SBWD100A User Manual - Manual (Page 15)

Second Screen Only
Second Screen Only mode causes the HDTV to be the only display for
the device. In this mode, the device’s screen will be blank.
Ultra-Low Delay
The Receiver also supports Ultra-Low Delay mode, which helps reduce
end-to-end wireless display latency. Real-time applications, such as
games, can run without noticeable delay when Ultra-Low Delay mode is
enabled on supported devices.
Intel WiDi 4.0 and higher
To activate Ultra-Low Delay on a device running Intel WiDi 4.0
or higher:
1. Launch the Intel WiDi application, then select Settings.
2. From the “Settings” screen, select Current Wireless Display.
3. Select Prioritize Speed from the “Quality vs. Speed” menu. Refer to
Intel’s support documentation for more information.
NVidia Shield
1. Go to “Settings,” then select Miracast™.
2. Tap on the toggle switch to turn “Game Mode” on.
Note: The output resolution will reset to 720P once this mode is enabled.
Refer to the device’s user manual for more information.
ScreenBeam Pro Wireless Display Receiver
14