Schreiber Chillers Excellon MM30AC - Manual (Page 10)

SET POINT BUTTON
TEMPERATURE DISPLAY
INSIDE YOUR CHILLER
Electrical System:
• The controller is powered by 240 volt supply power as well as the chiller. The
chiller can operate at both 60Hz and 50Hz, however, there is a 15% reduction in
cooling capacity, and a 17% reduction in flow capacity at 50 Hz
• High voltage electrical components stored in the control box. Take careful
precaution when open the door. Door must be secure in place when the unit is
operating.
CONTROLLER SETTING:
Parameters overview:
The Dwyer controller has many parameters available. Only a few will ever need
to be adjusted by the user. All other necessary parameters are pre-programmed
by the factory. If needed, call factory to obtain further details.
Parameter Function
SP
Cooling Set point
R0 Cooling Differential
R1 Lower Value Set Point
R2 Higher Value Set Point
9