Fan motors – Schreiber Chillers 1500ACsf User Manual

Page 15

Text mode
Original mode

FAN MOTORS

SPECIFICATIONS:

H.P. – 1 – 2 each.

VOLTAGE - 200/230/460/480 3 phase

HZ-50-60

RPM - 1725

OVERLOAD - Automatic, Internal

FRAME - LA56, ROT. CW or CCW as marked

MTG - Rigid, Open Motor

CAT. NO.: Leeson #114342

ROTATION:

Motor can run either direction, clockwise (CW) or counter clockwise
(CCW). Note the given direction on unit.

FAN BLADE:

24" x 23

CW from the top of the unit. – 2 each.

SAFETY:

Avoid personal injury or equipment damage by disconnecting
electrical power before working on the motor. Make sure the power
is off when checking each phase.

MAINTENANCE:

1.

There are no lubrication points; therefore, no lubrication is necessary.

Make sure the blade runs in the correct rotation.

Clean the outside of the fan motor as necessary.

1500AC.doc