Schreiber Chillers 1001ACsf - Manual (Page 4)

SETTING SOLID STATE CONTROL
This unit has a solid-state control that controls the temperature on the refrigeration
system. After the unit is wired to the proper voltage the control temperature and high
temperature alarm can be set.
On the front of this control is the temperature display, to set the temperature press and
hold button #2 while turning the set point screw above button #2. The temperature
display will indicate the set temperature as you turn the set point screw.
To set the high temperature alarm press and hold button #3 while turning the set point
screw above button #3. The temperature display will indicate the set temperature for the
high temperature alarm as you turn the set point screw.
We suggest you keep the differential between the temperature and the alarm at 5
0 F
then set the alarm temperature at 60 o F. The alarm will sound at 60 o F.
Press button #4 to turn the alarm off if necessary. After the cause of the alarm has been
found, be sure to turn the alarm back on.
CHECKING TEMPERATURE SET POINTS
To check temperature set points just press #2 for compressor and #3 for alarm set
points.
1001AC
6