Lexibook DJ023 Series - Manual (Page 20)

ENGLISH
20
TROUBLESHOOTING
Q: My camera doesn’t turn on when I press the Power key. What do I do?
A:
1. Check that you have installed the batteries correctly.
2. Place new batteries in your camera.
Q: Why does nothing happen when I press the Shutter key?
A:
The camera’s built-in memory may be full. If this is the case, you need to delete
photos from you camera. Make sure you transfer any photos you want to keep to
your computer first.
2. The timer may be counting down. Wait a few seconds.
Q: Why are my pictures unclear?
A:
1. The lens may be dirty. Gently blow any loose dust from the lens. Then breathe
gently on the lens and wipe it with a soft, clean cloth that has no chemicals on it.
2. Make sure you hold the camera steady when taking the pictures.
3. You may be too close to your subject. Try moving further away.
Q: Why are my pictures too dark?
A:
1. The flash may be turned off. See the “Flash function” section for how to set the
flash.
2. Open the “Dual Mode Camera” folder on the desktop, then double-click the
“PCCam” icon
to view the real-time images taken by the webcam.
Instant messaging (chat)
You can use your camera as a webcam with your instant messaging client (Yahoo
Messenger, MSN Messenger, Skype…).
Ex: using MSN Messenger
1. Put your camera in webcam mode and connect it to your computer then launch
MSN Messenger.
2. On the MSN interface, select “Actions”, then “Start a Video Conversation”.
3. Select the person you want to chat with, and press “OK”.
2. You may need to move closer to your subject or your subject may need to move
to a lighter area.
Q: Why are my pictures too light?
A:
You may not need the flash function. See the “Flash function” section for how to
change the flash setting.
Q: Why does the camera turn off automatically?
A:
1. Your batteries may be low. Place new batteries in your camera.
2. After 30 seconds of inactivity, your camera goes into power saving mode. Press
the “Power/Mode” key and see if it turns on.
Q: I have taken photos but my computer does not recognize my camera. What
do I do?
A:
1. Ensure that you have in fact taken photos. Press the Shutter key a few times to
take some sample photos and then try downloading them again.
2. Always use the USB cable that came with the camera. Make sure it is firmly
connected to the camera and the computer.
3. Give your computer time to recognize the USB connection device. Try refreshing
the device options list until you see the removable device appearing.