Lexibook DJ023 Series User Manual
Page 17
ENGLISH
17
TAKING PHOTOS (Camera Mode)
Single shooting
You are already in “Single shooting” mode when you switch on the camera (the
icon is displayed on screen). Press the Shutter key to take a photo. The number of
pictures that you can take in memory is shown on the LCD screen.
Continuous shooting
1. When you are in “Single shooting” mode, press the “Power/Mode” key once.
2. Then press the Shutter key repeatedly until the “Continuous shooting” mode
icon is displayed on the screen.
3. Press the Power/Mode” key once again to go back to camera mode then press
the Shutter key to take 3 pictures continuously.
4. To go back to “Single shooting” mode, repeat steps 1 and 2 above pressing
repeatedly the Shutter key until the icon is displayed on screen. Then press the
“Power/Mode” key to go back to camera mode.
Note: The flash is disabled in “Continuous shooting” mode.
FLASH FUNCTION
To use the flash, repeatedly press the “Down” key until your desired setting is shown
by the icon on the screen:
SELF-TIMER (CAMERA MODE ONLY)
1. Press the “Power/Mode” key once.
2. Press the Shutter key repeatedly until the “Self-timer” icon
is displayed on
screen.
3. Press the “Power/Mode” key one more time to go back to camera mode then
press the Shutter key to start the 10-second countdown and take the photo.
4. To turn off the self-timer feature and go back to “Single shooting” mode, repeat
steps 1 and 2 above pressing repeatedly the Shutter key until the
icon is
displayed on screen. Then press the “Power/Mode” key to go back to camera mode.
SELECTING THE PHOTO RESOLUTION
1. Press the “Power/Mode” key once then use the “Up” and “Down” keys to select
the “Resolution” icon
.
2. Press the Shutter key repeatedly to select the desired resolution.
There are 2 resolution modes:
High resolution (640x480 pixels, default mode).
Low resolution (320x240 pixels).
3. Press the “Power/Mode” key to go back to camera mode.
SELECTING THE IMAGE QUALITY
1. Press the “Power/Mode” key once then use the “Up” and “Down” keys to select
the “Image quality” icon .
2. Press the Shutter key repeatedly to select the desired image quality.
There are 2 levels of quality:
High quality (default mode).
Low quality.