beautypg.com

Introduction, Functional specification, General – Chenbro SK31101 Installation Guide with 3Gb/s SATA/SAS Backplane - Manual User Manual

Page 7: Host / drive / power backplane interface

background image

7

SK31101 ver. A2~A4
User’s Manual

www

.chenbr

o.com

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

Introduction

The CHENBRO SK31101 can house one 3.5” Hot-swap HDD in one 5.25” bay converter. The ability for

conversion allows existing server or PC to perform with one Hot-swap HDD and keep the flexibility.

In all, SK31101 is the best solution as value added feature and performance.

Functional Specification

General

z Support up to SATA-II and SAS (3.0 Gb/s)

z Compatible with 3.5” SAS and SATA-II HDD

z Support inrush current control for HDD Hot-swapping

z LED indicate activity and failure

z Key lock for HDD security

Host / Drive / Power Backplane Interface

z 1 to 1 connection for SATA / SAS HDD

z 1 x SATA / SAS Signal + Power (7+15 pin) connector at HDD side of backplane

z 1 x SATA / SAS interface (7 pin)

z 1 x DC power connectors (big 4-pin D-type)

The HDD activity LDE is available for SAS or most SATA-II HDDs.

If SATA-I HDD applied, the HDD activity LED will not work.