Camco D-Power 1 - Manual (Page 22)

D - P O W E R
S E R I E S
USER MANUAL
D-POWER 05/1
P.21
Output Power
1 kHz, THD ≤ 1 %, in dual channel operation
duration limited by thermal protection
D-POWER 05
2 x 250 W @ 4 Ω
2 x 125 W @ 8 Ω
D-POWER 1
2 x 500 W @ 4 Ω
2 x 250 W @ 8 Ω
Peak Output Power
1 kHz, single sine wave in dual channel operation
480 W @ 4 Ω
240 W @ 8 Ω 800 W @ 4 Ω
400 W @ 8 Ω
Output Power Mono Bridge
1 kHz, THD ≤ 1 %
duration limited by thermal protection
1 x 500 W @ 8 Ω
1 x 250 W @ 16 Ω 1 x 1000 W @ 8 Ω
1 x 500 W @ 16 Ω
Circuitry MOSFET, Class D
Signal to Noise-Ratio
20 Hz - 20 kHz, 8 Ω load, unweighted
A-weighted
>110 dB
>114 dB >111 dB
>115 dB
Power consumption @ 230 V
Idle
Amp switched on, no signal
Typical
@ of max output power with pink noise to represent typical music signal, both channels driven
0,3 A
23 W
1,0 A 1,6 A
120 W 200 W
Maximum output voltage
in dual channel operation
±62 V peak ±80 V peak
6 SPECIFICA
TION