Camco D-Power 1 - Manual (Page 20)

D - P O W E R
S E R I E S
1
3
2
USER MANUAL
D-POWER 05/1
P.19
4.7 Filter Cleaning
The air intake on the front of your D-POWER Amplifier is fitted with a remov-
able filter system. If the filter becomes clogged, the unit will not cool as
efficiently as it should and may result in reduced output levels.
WARNING: Disconnect the amplifier from the mains before removing
the front frame.
D-POWER Filter Assembly
1 Foam Filter
2 Front Frame
3 Screw
To clean or replace the filter just slightly unscrew the fixing screw with the
help of a 3 mm allen key. The screw will be held back by a small plastic
spacer on the back of the frame to avoid losing it. Then shift the front
frame slightly to the right. Then you should be able to remove the frame
from the amplifier completely (pull gently to avoid any bending of the front
frame).
4 OPERA
TION