BatteryMINDer 24041-AA - Manual (Page 30)

Rev. B-020907 P/N VDC24041AA-MNL
BatteryMINDer ® Model 24041-AA
Page 0
DETAILED SPECIFICATIONS - VDC Model No. 24041-AA (con’t.)
• Charging Output Control Characteristics
• Charging Flow : Battery condition detect>Soft Start Charge>Bulk Charge>Absorption
Charge>Sulphate Check>Float Charge
• Soft Start Charging Activity conditions: Battery Voltage is over 6 Vdc and less than 21Vdc
(the charger will start at 1A mode & Gel mode automatically)
• Soft Start Charging output current control: (1A / 2A / 4A mode) 1 / 2 / 4 ±0.25 Adc
• Soft Start Charging Time Limited: (Stop charge If battery cannot be charged over 10.5V after
6 hrs, Error LED flash indicated) 6 ±0.25 Hours
• Bulk Charging Activity conditions: Battery Voltage is over 21Vdc (the charger will start at
1A mode & Gel mode automatically)
• Bulk Charging Current control at 1A mode: (Selected by pressing Charge Rate Button)
1 +0.17 / -0 Adc
• Bulk Charging Current control at 2A mode: (Selected by pressing Charge Rate Button)
2 +0.20 / -0 Adc
• Bulk Charging Current control at 4A mode: (Selected by pressing Charge Rate Button)
4 +0.22 / -0 Adc
• Max. rated output voltage and current: 26.0V at 4Adc 27.2V at .25Adc
• Bulk Charging Time Limited: (Stops charge If battery cannot be charged reach 28.2/28.8/28.2V
after 20 hrs, error LED flash indicated) 20 ±1 Hours